Published Articles >> Table of Contents
International Conference on Shape Modeling and Applications 2004 (SMI'04)
| Introduction |
Preface (PDF)
p. x
 
|
Conference Committees (PDF)
pp. xi-xii
|
Reviewers (PDF)
p. xiii
|
| INVITED TALK |
Dynamic Body Transformation and Matching from Scanned Data (PDF)
Nadia Magnenat-Thalmann, MIRALab - University of Geneva
Hyewon Seo, MIRALab - University of Geneva
p. 3
|
| IMPLICIT SURFACES |
A Hybrid Shape Representation for Free-Form Modelling (Abstract)
Remi Allegre, LIRIS CNRS, Université Claude Bernard Lyon 1
Aurelien Barbier, LIRIS CNRS, Université Claude Bernard Lyon 1
Eric Galin, LIRIS CNRS, Université Claude Bernard Lyon 1
Samir Akkouche, LIRIS CNRS, Université Claude Bernard Lyon 1
pp. 7-18
 
|
Multi-Scale Reconstruction of Implicit Surfaces with Attributes from Large Unorganized Point Sets (Abstract)
Ireneusz Tobor, LaBRI - CNRS - INRIA, Universite Bordeaux 1
Patrick Reuter, LaBRI - CNRS - INRIA, Universite Bordeaux 1
Christophe Schlick, LaBRI - CNRS - INRIA, Universite Bordeaux 1
pp. 19-30
|
3D Scattered Data Approximation with Adaptive Compactly Supported Radial Basis Functions (Abstract)
Yutaka Ohtake, Max-Planck-Institut für Informatik and RIKEN
Alexander Belyaev, Max-Planck-Institut für Informatik
Hans-Peter Seidel, Max-Planck-Institut für Informatik
pp. 31-39
|
| FEATURE-BASED MODELING AND DEFORMATIONS |
Fitting and Manipulating Freeform Shapes by Extendable Freeform Templates (Abstract)
Y. Song, Delft University of Technology
J.S.M. Vergeest, Delft University of Technology
S. Spanjaard, Delft University of Technology
pp. 43-52
|
Multi-Minimisations for Shape Control of Fully Free-Form Deformation Features (Abstract)
J-P. Pernot, Domaine Universitaire
S. Guillet, Domaine Universitaire
J-C. Leon, Domaine Universitaire
B. Falcidieno, Istituto di Matematica Applicata e Tecnologie Informatiche - CNR
F. Giannini, Istituto di Matematica Applicata e Tecnologie Informatiche - CNR
pp. 53-62
|
Sweepers: Swept User-Defined Tools for Modeling by Deformation (Abstract)
Alexis Angelidis, University of Otago
Geoff Wyvill, University of Otago
Marie-Paule Cani, Laboratoire GRAVIR
pp. 63-73
|
| GEOMETRIC ALGORITMS |
Computing Planar Sections of Surfaces of Revolution with Revolute Quadric Decomposition (Abstract)
Jinyuan Jia, Hong Kong University of Science and Technology and Liaoning University of Petroleum & Chemical Technology
Kai Tang, Hong Kong University of Science and Technology
Ajay Joneja, Hong Kong University of Science and Technology
Ki-Wan Kwok, Hong Kong Polytechnic University
pp. 77-86
|
Nonlinear Polynomial Systems: Multiple Roots and Their Multiplicities (Abstract)
K. H. Ko, Massachusetts Institute of Technology
T. Sakkalis, Massachusetts Institute of Technology
N. M. Patrikalakis, Massachusetts Institute of Technology
pp. 87-98
|
| SUBDIVISION SURFACES |
Polygonal Decomposition of the 1-Ring Neighborhood of the Catmull-Clark Scheme (Abstract)
I.P. Ivrissimtzis, MPI - Informatik
R. Zayer, MPI - Informatik
H.-P. Seidel, MPI - Informatik
pp. 101-109
|
Semiregular Pentagonal Subdivisions (Abstract)
Ergun Akleman, Texas A&M University
Vinod Srinivasan, Texas A&M University
Zeki Melek, Texas A&M University
Paul Edmundson, Texas A&M University
pp. 110-118
|
Detail-Preserving Variational Surface Design with Multiresolution Constraints (Abstract)
Ioana Boier-Martin, IBM T. J. Watson Research Center
Remi Ronfard, INRIA Rhône-Alpes
Fausto Bernardini, IBM T. J. Watson Research Center
pp. 119-128
|
Surface Quality Assessment of Subdivision Surfaces on Programmable Graphics Hardware (Abstract)
Yusuke Yasui, Keio University SFC
Takashi Kanai, Keio University SFC
pp. 129-138
|
| INVITED TALK |
A Generative Theory of Shape (PDF)
Michael Leyton, Rugters University
p. 141
|
| SHAPE RETRIEVAL |
A Survey of Content Based 3D Shape Retrieval Methods (Abstract)
Johan W.H. Tangelder, Utrecht University
Remco C. Veltkamp, Utrecht University
pp. 145-156
|
Augmented Reeb Graphs for Content-Based Retrieval of 3D Mesh Models (Abstract)
Tony Tung, Ecole Nationale Supérieure des Télécommunications
Francis Schmitt, Ecole Nationale Supérieure des Télécommunications
pp. 157-166
|
The Princeton Shape Benchmark (Abstract)
Philip Shilane, Princeton University
Patrick Min, Princeton University
Michael Kazhdan, Princeton University
Thomas Funkhouser, Princeton University
pp. 167-178
|
| MESH PROCESSING |
Differential Coordinates for Interactive Mesh Editing (Abstract)
Yaron Lipman, Tel-Aviv University
Olga Sorkine, Tel-Aviv University
Daniel Cohen-Or, Tel-Aviv University
David Levin, Tel-Aviv University
Christian Rossl, MPI Saarbrücken
Hans-Peter Seidel, MPI Saarbrücken
pp. 181-190
|
Least-Squares Meshes (Abstract)
Olga Sorkine, Tel Aviv University
Daniel Cohen-Or, Tel Aviv University
pp. 191-199
|
A Fast and Simple Stretch-Minimizing Mesh Parameterization (Abstract)
Shin Yoshizawa, MPI Informatik
Alexander Belyaev, MPI Informatik
Hans-Peter Seidel, MPI Informatik
pp. 200-208
|
View-Dependent Streaming of Progressive Meshes (Abstract)
Junho Kim, POSTECH and RWTH
Seungyong Lee, POSTECH
Leif Kobbelt, RWTH
pp. 209-220
|
Constant-Time Navigation in Four-Dimensional Nested Simplicial Meshes (Abstract)
Michael Lee, University of Maryland at College Park
Leila De Floriani, University of Maryland at College Park and Università di Genova
Hanan Samet, University of Maryland at College Park
pp. 221-230
|
| POINT-BASED MODELING |
Robust Watermarking of Point-Sampled Geometry (Abstract)
Daniel Cotting, Swiss Federal Institute of Technology
Tim Weyrich, Swiss Federal Institute of Technology
Mark Pauly, Stanford University
Markus Gross, Swiss Federal Institute of Technology
pp. 233-242
|
Approximating Bounded, Non-Orientable Surfaces from Points (Abstract)
Anders Adamson, Darmstadt University of Technology
Marc Alexa, Darmstadt University of Technology
pp. 243-252
|
| APPLICATIONS I |
Evaluation and Visualization of Stress and Strain on Soft Biological Tissues in Contact (Abstract)
Sofiane Sarni, Swiss Federal Institute of Technology
Anderson Maciel, Swiss Federal Institute of Technology
Ronan Boulic, Swiss Federal Institute of Technology
Daniel Thalmann, Swiss Federal Institute of Technology
pp. 255-262
|
Mold Accessibility via Gauss Map Analysis (Abstract)
Gershon Elber, Technion
Xianming Chen, University of Utah
Elaine Cohen, University of Utah
pp. 263-272
|
| INTERACTIVE MODELING |
Stroke-Input Methods for Immersive Styling Environments (Abstract)
Timo Fleisch, Fraunhofer IGD
Gino Brunetti, Fraunhofer IGD
Pedro Santos, Fraunhofer IGD
Stork Stork, Fraunhofer IGD
pp. 275-283
|
A Novel Interface Paradigm for Supporting Product Design (Abstract)
Kuo-Cheng Wu, University of Salford
Terrence Fernando, University of Salford
pp. 284-290
|
| INVITED TALK |
Building Shapes by Self-Assembly (PDF)
Aristides A. G. Requicha, University of Southern California
p. 293
|
| APPLICATIONS II |
Contouring Medial Surface of Thin Plate Structure Using Local Marching Cubes (Abstract)
Tomoyuki Fujimori, University of Tokyo
Hiromasa Suzuki, University of Tokyo
Yohei Kobayashi, University of Tokyo
Kiwamu Kase, RIKEN
pp. 297-306
|
Closing Gaps by Clustering Unseen Directions (Abstract)
G. Impoco, Consiglio Nazionale delle Ricerche
P. Cignoni, Consiglio Nazionale delle Ricerche
R. Scopigno, Consiglio Nazionale delle Ricerche
pp. 307-316
|
Extension of ISO 10303, the STEP Standard, for the Exchange of Procedural Shape Models (Abstract)
Michael J. Pratt, LMR Systems
pp. 317-326
|
| SPECIAL SESSION |
AIM@SHAPE Project Presentation (PDF)
Bianca Falcidieno, IMATI CNR
p. 329
|
| SHORT PAPERS |
Verification of Scanned Engineering Parts with CAD Models Based on Discrete Curvature Estimation (Abstract)
B. Lipshitz, Technion-Israel Institute of Technology
A. Fischer, Technion-Israel Institute of Technology
pp. 333-336
|
Decomposition of Complex Models for Manufacture (Abstract)
T. Lim, Heriot-Watt University
H. Medellin, Heriot-Watt University
J.R. Corney, Heriot-Watt University
J.M. Ritchie, Heriot-Watt University
J.B.C. Davies, Heriot-Watt University
pp. 337-341
|
Using Semi-Implicit Representation of Algebraic Surfaces (Abstract)
Laurent Buse, INRIA Sophia-Antipolis
Andre Galligo, Université de Nice Sophia-Antipolis
pp. 342-345
|
Procedural Modeling of Cracks and Fractures (Abstract)
Aurelien Martinet, Artis-GRAVIR INRIA Rhône Alpes
Eric Galin, LIRIS CNRS UCB Lyon 1
Brett Desbenoit, LIRIS CNRS UCB Lyon 1
Samir Akkouche, LIRIS CNRS UCB Lyon 1
pp. 346-349
|
Generative Parametric Design of Gothic Window Tracery (Abstract)
Sven Havemann, TU Braunschweig
Dieter Fellner, TU Braunschweig
pp. 350-353
|
Modeling the Coronary Artery Tree (Abstract)
Cristian Lorenz
Jens von Berg
Thomas Bulow
Steffen Renisch
Sven Wergandt
pp. 354-357
|
Empirical Analysis of Computational and Accuracy Tradeoffs Using Compactly Supported Radial Basis Functions for Surface Reconstruction (Abstract)
Bryan Morse, Brigham Young University
Weiming Liu, Brigham Young University
Lauralea Otis, Brigham Young University
pp. 358-361
|
Shape Deformations with Meaningful Parameters and Constraints (Abstract)
Raluca Dumitrescu, Delft University of Technology
Joris S.M. Vergeest, Delft University of Technology
pp. 362-366
|
Calibration Issues for Projector-based 3D-Scanning (Abstract)
Tilo Gockel
Pedram Azad
Rudiger Dillmann
pp. 367-370
|
Reeb Graph Representation of Surfaces with Boundary (Abstract)
Silvia Biasotti, Consiglio Nazionale delle Ricerche
pp. 371-374
|
Shape Recovery Using Functionally Represented Constructive Models (Abstract)
Pierre-Alain Fayolle, University of Aizu
Alexander Pasko, Hosei University
Elena Kartasheva, Institute for Mathematical Modeling
Nikolay Mirenkov, University of Aizu
pp. 375-378
|
A Scan-Line Algorithm for Clustering Line Segments (Abstract)
K. V. Kostas, National Technical University of Athens
A. I. Ginnis, National Technical University of Athens
P. D. Kaklis, National Technical University of Athens
pp. 379-382
|
| COLOR PLATES |
A Hybrid Shape Representation for Free-Form Modelling (Figures 7, 9, and 10) (PDF)
R. Allegre
A. Barbier
E. Galin
S. Akkouche
p. 385
|
Detail-Preserving Variational Surface Design with Multiresolution Constraints (Figures 5, 8, and 9) (PDF)
I. Boier-Martin
R. Ronfard
F. Bernardini
p. 386
|
Surface Quality Assessment of Subdivision Surfaces on Programmable Graphics Hardware (Figures 7, 8, and 9) (PDF)
Y. Yasui
T. Kanai
p. 387
|
A Survey of Content Based 3D Shape Retrieval Methods (Figure 5) (PDF)
J. W. H. Tangelder
R. C. Veltkamp
p. 388
|
The Princeton Shape Benchmark (Figures 1 and 2) (PDF)
P. Shilane
P. Min
M. Kazhdan
T. Funkhouser
p. 388
|
Augmented Reeb Graphs for Content-Based Retrieval of 3D Mesh Models (Figures 2 and 15) (PDF)
T. Tung
F. Schmitt
p. 389
|
A Fast and Simple Stretch-Minimizing Mesh Parameterization (Figures 1 And 9) (PDF)
S. Yoshizawa
A. Belyaev
H.-P. Seidel
p. 390
|
View-Dependent Streaming of Progressive Meshes (Figure 9) (PDF)
J. Kim
S. Lee
L. Kobbelt
p. 391
|
Robust Watermarking of Point-Sampled Geometry (Figures 6, 7, 8, 9, 10, 11, 12, 13, and 14) (PDF)
D. Cotting
T. Weyrich
M. Pauly
M. Gross
p. 392
|
Approximating Bounded, Non-Orientable Surfaces from Points (Figures 5, 6, and 7) (PDF)
A. Adamson
M. Alexa
p. 393
|
Evaluation and Visualization of Stress and Strain on Soft Biological Tissues in Contact (Figure 7) (PDF)
S. Sarni
A. Maciel
R. Boulic
D. Thalmann
p. 394
|
Mold Accessibility via Gauss Map Analysis (Figure 4) (PDF)
G. Elber
X. Chen
E. Cohen
p. 395
|
A Novel Interface Paradigm for Supporting Product Design (Figures 4 and 7) (PDF)
K.-C. Wu
T. Fernando
p. 395
|
Contouring Medial Surface of Thin Plate Structure Using Local Marching Cubes (Figures 15, 16, and 17) (PDF)
T. Fujimori
H. Suzuki
Y. Kobayashi
K. Kase
p. 396
|
Closing Gaps by Clustering Unseen Directions (Figures 5, 6, 7, and 8) (PDF)
G. Impoco
P. Cignoni
R. Scopigno
p. 397
|
Verification of Scanned Engineering Parts with CAD Models Based on Discrete Curvature Estimation (Figures 1, 2, 3, 4, and 5) (PDF)
B. Lipshitz
A. Fischer
p. 398
|
Modeling the Coronary Artery Tree (Figures 1, 2, 4, and 5) (PDF)
C. Lorenz
J. von Berg
T Bulow
S. Renisch
S. Wergandt
p. 399
|
Shape Recovery Using Functionally Represented Constructive Models (Figure 2) (PDF)
P.-A. Fayolle
A. Pasko
E. Kartasheva
N. Mirenkov
p. 400
|
| Author Index |
Author Index (PDF)
pp. 401-402
|
