|
Published Articles >> Table of Contents >> Abstract
2003 IEEE International Conference on Computer Design (ICCD'03)
p. 387
On Combining Pinpoint Test Set Relaxation and Run-Length Codes for Reducing Test Data Volume
Seiji Kajihara, Kyushu Institute of Technology
Yasumi Doi, Kyushu Institute of Technology
Lei Li, Duke University
Krishnendu Chakrabarty, Duke University
Full Article Text:
  
DOI Bookmark: http://doi.ieeecomputersociety.org/10.1109/ICCD.2003.1240925
Send link to a friend
| Abstract |
|
This paper presents a pinpoint test set relaxation method for test compression that maximally derives the capability of a run-length encoding technique such as Golomb coding or frequency-directed run-length (FDR) coding. Before encoding a given set of test patterns, we selectively relax some specified bits of the test patterns. By changing a specified bit with value 1 to a don't-care, two consecutive runs of 0s in the test sequence can be concatenated into a longer run of 0, thereby facilitating run-length coding. This procedure retains the fault coverage of the test set. Since the increase in compression depends on the lengths of the two runs that are concatenated with each bit relaxation, a lookup table, referred to as the gain table, is pre-computed and used during the test set relaxation procedure to maximize the likelihood of increasing the amount of test data compression. The gain table is used to pinpoint the bit positions with value 1, which when relaxed to don't-cares, will yield the most compression. In this way, the given test pattern set is appropriately modified as a preprocessing step before test compression. Experimental results for the ISCAS benchmark circuits show that the proposed method can be used to increase the effectiveness of run-length coding methods for test data compression.
|
 Additional Information
|
Citation:
Seiji Kajihara, Yasumi Doi, Lei Li, Krishnendu Chakrabarty,
"On Combining Pinpoint Test Set Relaxation and Run-Length Codes for Reducing Test Data Volume,"
iccd,
p. 387,
2003 IEEE International Conference on Computer Design (ICCD'03),
2003
|
|
